• Stainless steel
• 32nds, mm markings, dec. equivalents

• Stainless steel
• 100ths, 64ths, 32nds, 16ths, 10ths, mm

• 64ths, mm

• 64ths, decimal equivalents

• 64ths, mm

• 32nds, mm, cm

• 16ths, mm

• 8ths, 16ths, mm

• Leafs from .002 to .025 w/mm
  equiv. & 2" scale
• Used individually or combined for precise
  measurement of gaps
• Chrome plated with knurled
  nut to lock in place
• Meets Fed. Specs #GGG-G-17C
  for tolerance

• 29 fractional drills 1/16" to 1/2" by 64ths
• Made of tempered steel 6-1/2" long
• Reads in fractions with decimal equivalents
• Easy to read white markings on black finish,
  stamped letters on reverse side

• Slide rule conversion 7" long
• Converts inch/mm, ga./liter, pounds/kg.,
  Fahrenheit/celsius, feet/meters, yards/meters
• Extensive equivalents, formulas,
  fraction/decimal/metric equivalent chart

• SAE standards - #1 to 5/16"
• Tempered steel 5/64" thick, 5-1/8" long
• Used to identify size of screws, bolts, rivets,
  wires, pins with length, diameter,
  wire size, screw pitch, and clearance
  drill size

• Diecast metal frame, 5" long
• 1" capacity by .0005"
• Ratchet stop and spindle lockout
  to hold measurement
• Adjustable realignment to "0"

• Brass body and slide, 4-7/8" long
• 4"/80mm capacity by 32nds and mm.
• Reads inside and outside measurements

• 4-3/4"/120mm capacity by 1/6"/1/10mm
• 7-1/8" long steel body
• Friction stop roller and thumb screw lockout
• 3 way measuring- inside, outside, depth

• 3 way measuring- inside, outside, depth
• Bezel realignment to "0"
• Reinforced nylon construction

• Direct dial reading in inches and mm
• 4 way measuring- inside, outside,
  depth, and step
• Adjustable bezel realignment to "0"
• Fiberglass reinforced nylon with
  milled jaws for precision. 8-3/4" long.
• Thumb lockout holds measurement.

• Direct dial reading in inches and mm
• 4 way measuring- inside, outside,
  depth, and step
• Adjustable bezel realignment to "0"
• Fiberglass reinforced nylon with
  milled jaws for precision. 8-3/4" long.
• Thumb lockout holds measurement.

• Hardened stainless steel with
  satin chrome finish. 9-1/8" long.
• Accurate to .0005/.25mm
• 3 way measuring- inside, outside, depth
• LCD display with automatic power off
• SPC interface #RS232
• Uses #37891 (SR44W) replacement battery

• 6" long, high strength plastic
  with brass hardware.
• Measure/transfer inside/outside
  sloped angles
• Use for miter angle layout
• The finest multi-purpose protractor
  on the market

• 6" stainless steel arm, square head
• 0-180° measurements
• Use to measure and transfer angles

• Use for making precise depth
  measurements in small holes and slots
• Spring tension nut secures the
  rule at 90° to the base
• Angles of 30°, 45°, and 60°
  are etched on backside

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

• Square leg calipers of hardened, forged steel
• Fast-action release
• Hardened and tempered bow springs
• Fulcrum spools provide even tension
• Adjustment screws for quick, easy movement

• Use for setting cutting depth of router bit,
  table saw or circular saw blade
• Solid aluminum gauges will not rust
• Deep stamped numbers and graduations